Creating A Multi-Channel Program - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools
Hide thumbs Also See for SINUMERIK 828D:
Table of Contents

Advertisement

Multi-channel machining
10.2 Multi-channel support
10.2.2

Creating a multi-channel program

All of the programs involved in a multi-channel machining operation are combined in one
workpiece.
In a job list, enter the program names, define the program type - G code or ShopTurn
program - and assign these to a channel.
Precondition
● "programSYNC" option
Procedure
618
Machine manufacturer
If you only program G code programs, then you can switch-out the multi-channel
view.
Please refer to the machine manufacturer's specifications.
1.
Select the "Program Manager" operating area.
2.
Press the "NC" softkey and select the "Workpieces" folder.
3.
Press the "New" and "programSYNC multi-channel" softkeys.
The "New job list" window opens.
4.
Enter the required name and press the "OK" softkey.
The "Job list *.JOB" window opens.
For each channel that has been set-up, the window has one line to in-
put or select the assigned program.
5.
Position the cursor on the required channel line, enter the required pro-
gram name and select the program type (G code or ShopTurn).
6.
Press the "OK" softkey.
The "Multi-channel data" parameter screen opens in the editor.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840d sl

Table of Contents

Save PDF