Rotating The View - Siemens SINUMERIK 828D Operating Manual

Machining the workpiece
5.16 Working with DXF files
Procedure
5.16.2.5

Rotating the view

You can change the orientation of the drawing.
Precondition
The DXF file is opened in the Program Manager or in the editor.
Procedure
...
184
1. Press the "Details" and "Magnifying glass" softkeys.
A magnifying glass in the shape of a rectangular frame appears.
2. Press the <+> key to enlarge the frame.
- OR -
Press the <-> key to reduce the frame.
- OR -
Press a cursor key to move the frame up, down, left or right.
3. Press the "OK" softkey to accept the section.
1. Press the "Details" and "Rotate figure" softkeys.
2. Press the "Arrow right", "Arrow left", "Arrow up", "Arrow down", "Arrow
clockwise" and "Arrow counter-clockwise" softkeys to change the posi-
tion of the drawing.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning