Unload/Load/Relocate All Tools - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools
Hide thumbs Also See for SINUMERIK 828D:
Table of Contents

Advertisement

Several magazines
If you have set up several magazines, then the "...relocate from magazine... location... to..."
window appears after pressing the "Relocate" softkey.
Select the desired magazine and location, and confirm your selection with "OK" to load the
tool.
12.8.3

Unload/load/relocate all tools

You have the option of unloading all tools from the magazine list, loading all tools to the
magazine or relocating tools simultaneously.
Preconditions
The following requirements must be satisfied so that the "Unload all", "Load all" or "Relocate
all" softkey is displayed and available:
● Magazine management is set up
● There is no tool in the buffer / in the spindle
Procedure
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
4.
Press the "OK" softkey to relocate the tool to the recommended maga-
zine location.
- OR -
Enter the required magazine number in the "...magazine" field and the
required magazine location number in "Location" field.
Press the "OK" softkey.
The tool is relocated to the specified magazine location.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
The magazine list is opened.
2.
Press the "Unload all" softkey.
- OR -
Press the "Load all" softkey.
- OR -
Tool management
12.8 Magazine
705

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840d sl

Table of Contents

Save PDF