Table of Contents
Advertisement
desired IP address number in the blank of the LAN IP.
3.5.4 Privilege
Privilege setting allows you to keep certain PCs on your network from accessing to the Internet. You can set up a
filter through an IP address or network port number. Users who have their IP address or Port number listed on the
"Blocked Private Address" field or "Block Private Ports" field will no longer be able to access the Internet. Figure
3-29 shows the screen of Privilege setting.
Figure 3-29 Privilege Menu Screen
3.5.5 Virtual Servers
You can set up public services on your network by configuring the values in the Virtual Servers Setting menu. You
may assign certain IP addresses as the destination of the network information. When users from the Internet make
certain requests of your network, the Router will forward those requests to the appropriate computer. The DHCP
function must be disabled to use this function.
This function is generally used to set up a web server, ftp server, or e-mail server on your network. Figure 3-30
shows the screen of Virtual Servers Menu. If you had set Alias IP for WAN, Figure 3-31 shows the screen of
Virtual Servers Menu.
To add a Virtual Server:
1. Select the Profile number used by the server.
2. Click on the "Name" column and enter the application name.
3. Select Enabled or Disabled to enable or disable the profile.
4. Enter the IP Address of the server that you want the Internet users to be able to access.
5. Configure as many entries as you would like until all the link entries are filled.
6. Click the "Apply" button to save the settings.
-24-
Advertisement
Table of Contents
