Dynamic Ip For Wan; Alias Ip Setup; Dns - Honeywell MDENR100 Installation Manual

Cable / dsl router
Table of Contents

Advertisement

3.2.4 Dynamic IP for WAN

If you did not receive any values such as fixed IP address, Subnet Mask, Default Gateway and Primary DNS IP
address from your ISP, choose the "NO" option in both Figure 3-4 Cable/DSL Setup Menu Screen and Figure 3-8
DNS Menu Screen.
Note: See Appendix A to learn more about static and dynamic IP address.
3.2.5 WAN Alias IP Setup
The WAN Alias IP Setup allows you to enter maximum 5 IP addresses that can be distributed to your computer.
The error message will pop up if you enter more than 5 IP addresses. See Figure 3-11 WAN Alias IP Setup. Note
that this function is effective only when your ISP supports it. If you want to delete the entered IP address, pull
down the IP address and highlight the IP address you want to delete. Click Delete this entry. Then this IP address
will be deleted.
The application of Virtual Server and DMZ Host IP Addresses requires more than one IP address. Alias IP provides
a good support for such applications.
Figure 3-11 WAN Alias IP Setup

3.2.6 DNS

Select the item of DNS from the Setup menu. The following screen will appear. You can enter the DNS Address.
Your ISP should provide you with at least one DNS IP Address. If not, contact your ISP.
-14-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hbenr100

Table of Contents