Table of Contents
Advertisement
Dynamic Routing:
Dynamic Routing can be used to cache routes learned by routing protocols, thus allowing the automation of static
routing maintenance. The router, using the RIP protocol, determines the network packet's route based on the
fewest number of hops between the source and the destination. In this case, you could automatically adjust to
physical changes in the network's layout. Complete the following steps to set up dynamic Routing:
Step 1 Choose the Working Mode.
Gateway Mode means the router is served as a gateway that hosts your network's connection to the
Internet.
Router Mode means there is more than one router that exists on your network.
Step 2 Select Dynamic Routing from the drop down list and choose the protocol you wish to use on your
network.
Step 3 Click the "Apply" button.
3.5.7 WAN MAC Clone
Enter the MAC Address if your ISP allows access of one specific PC's Ethernet MAC address. (See Figure 3-34
WAN MAC Address Setting)
Click Restore MAC Address to return to the default setting.
Figure 3-33 Static Routing and Dynamic Routing Menu Screen
-27-
Advertisement
Table of Contents
