Advertisement
W
iring diagram
Fig. D-2
Face the tube of Power supply cord unit to Housing L, and set Power supply cord unit
in place as drawn below.
Cord clamp
Fig. D-3
Flag connectors have
to be connected so that
their wire connecting
portion is located to
the opposite side of
+ - pole marks.
Do not put any Lead wires
between Terminal and Rib B.
Fit 3-pin connector into the room on
Housing L as drawn below, and then
put 6-pin connector on 3-pin connector
as drawn in right.
Room for
5-pin connector
3-pin connector
Putting Power supply cord unit
Housing L
Tube
Power supply cord unit
Putting Connectors
Terminal
Rib B
Rib A
Put Fuse in this place.
(for North American countries.)
Grip
Cord clamp
5-pin connector
Route Stator's Lead wires
between Controller and Boss.
Controller
Power
supply
Cord clamp
cord
Power supply cord has to be fastened with
Cord clamp so that the cord end aligns to Rib A.
Do not clamp Tube with Cord clamp.
P 12/ 13
Stator
Boss
6-pin connector
Tube
Power supply
cord unit
Advertisement
