Advertisement
W
iring diagram
Fig. D-4
Fig. D-5
Grip L
Reverse switch
Reverse switch has to be put to Grip L so
as to face its Terminal (1) to Grip L side.
Wiring in Grip
Setting Reverse switch and Receptacles
Boss
Terminal (1)
Terminal (P)
Reverse switch
See Fig. D-5 in details about the setting of
Reverse switch and its Receptacles.
6-pin connector
Put 6-pin connector
Grip L as drawn left.
Be careful to the direction.
Put the slack portion of
lead wires in this place.
Receptacle covered with Sleeve
Receptacle covered with Sleeve has to be
connected to Terminal (1) of Reverse switch.
Lead wires connected to Terminals
has to be faced to the direction drawn
in left so that they can be easily routed
between Boss and the wall of Grip L.
Receptacle
P 13/ 13
into the room of
Advertisement
