Connecting The Hose; Storage Of Accessories; Maintenance - Makita XCV04 Instruction Manual

Connecting the hose

CAUTION:
Never force the hose for bending or
•
stamp it. Never move the cleaner by a
hose. Forcing, stamping and pulling the
hose may cause a breakage or
deformation of the hose.
When picking up large wastes such as
•
planer carvings, concrete dusts or
similar other than small wastes, use
the 38 mm inner diameter hose
(optional accessory). Using the 28 mm
inner diameter
accessory) may cause a hose stuffing
and damage.
015541
Insert the hose onto the mounting port of
the tank and turn it clockwise until it locks.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched
•
off, unplugged,
cartridge is removed before attempting
to perform inspection or maintenance.
Storage of power supply cord
015724
You can wind up the power supply cord
around the tool box.
hose (optional
and the battery

Storage of accessories

015539
015618
The pipes can be placed into the pipe
holder when not using the cleaner for a
short time.
015548
The hose can be stored around the tool by
connecting each ends.
Cleaning
CAUTION:
Never use gasoline, benzine, thinner,
•
alcohol or
deformation or cracks may result.
Cleaning of cloth filter
(for the cloth filter model)
015543
12
the like. Discoloration,