Makita XCV04 Instruction Manual page 10

Installing the water filter (for cloth
filter model) (optional accessory)
CAUTION:
Never pick up water or wet dust without
•
the float and the cloth filter or the water
filter.
For picking up wet dust, make sure that
•
the float cage and the float are installed
on the cleaner.
When installing the water filter on the
•
tank, set it tight at the opening of the
tank so that the hook of the water filter
engages the tank opening firmly and
there is no space between the water
filter and the tank.
NOTICE:
It is recommended using water filter
•
when picking up large amount of water
repeatedly. Otherwise vacuum ability
may be reduced in case of cloth filter.
3
3
015532
To pick up water or wet dust only, the water
filter is more suitable than the cloth filter.
When installing the water filter, align its
mounting position mark with the one on the
tank.
Installing the paper pack
(optional accessory)
WARNING:
When using the paper pack, also use
•
the cloth filter or prefilter together that
is preinstalled on the tool. Failure to
use the cloth filter / prefilter together
may cause unusual noise and heat,
resulting in a fire.
CAUTION:
(For the cloth filter model)
Never pick up water or other liquids or
•
wet dusts when using the paper pack.
Picking up such things may cause the
paper pack breakage.
1. Water filter
2. Tank
1
3. Mounting
position marking
2
Before using the paper pack, make
•
sure that
accessory),
accessory) and prefilter are always
used together.
(For the powder filter model)
Before using the paper pack, make
•
sure that powder filter, damper and
prefilter are always used together.
1. Remove the rubber holder.
1
015535
2. Extend the paper pack.
3. Align the paper pack opening with the
dust suction opening of the cleaner.
4. Insert the cardboard of the paper pack
onto the holder so that it is positioned
at the
protrusion.
1
015536
Installing the polyethylene bag
Cleaner can
polyethylene
polyethylene bag is easier to empty the
tank without letting your hands dirty.
10
powder filter
damper
1. Rubber holder
1
end beyond the
1. Paper pack
2. Holder
2
also be used
bag. However,
(optional
(optional
detent
without
using