Button Operation During Monitoring - Honeywell SmartLine ST 800 User Manual

PV Function Block Mode
Process Variable Tag
Engineering Units
Square Root Output
Bar Graph
Trend Graph

4.5.4 Button operation during monitoring

When the operator screens are active on the advanced display, the increment and decrement buttons (
and ) can be used to move to the next or previous operator screen without waiting for the rotation time to
expire. Pressing the Enter button () will call up the main menu.
87
The Function Block Mode is only displayed for Foundation Fieldbus transmitters.
The eight possible Modes are shown below.
OOS Out of Service
Auto Automatic
Man Manual
Cas Cascade
User Configurable. This field has 14 characters
User Configurable. This field has 8 characters
Pressure: Pressure:
atm kPa
bar mbar
ftH2O @ 68F mmH2O @ 4C
gf/cm2 mmH2O @ 68F
inH20 @ 39F cmH2O @ 4C
inH20 @ 60F mH2O @ 4C
inH20 @ 68F inHg mmHg @ 0C
@ 0C kgf/cm2 MPa
Pa
psi
Torr
This indicator is displayed when the Transfer Function of the transmitter analog
output is set to "Square Root".
Note that this indicator is not displayed on the Trend screens.
The limits of the bar graph are user-configurable for each screen.
The limits of the trend graph are user-configurable for each screen. The
amount of time visible on the Trend graph is also configurable.
ST 800 Pressure Transmitter User's Manual
RCas Remote Cascade
Rout Remote Output IMan
Initialization Manual
LO Local Override
Temp: Flow:
o
C gal/min
gal/h
o
F
impgal/h
o R
K (Kelvin) L/s
L/min
Other: L/h
% (percent) mA bbl/h
(milliamps) CFH
Custom Text SCFM
SCFH
SCFD
MSCFH
MMSCFH
m3/h
lb/min
lb/h
kg/h
MT/h
Revision 15