How To Select System Options - Honeywell ADEMCO 6271 Series Installation And Setup Manual

How to Select System Options

The system options allow you to place buttons on the "Home" screen.
The SECURITY button is always displayed and cannot be removed.
A Lighting button can also be added to the "Home" screen. To avoid
confusion to the user, only buttons whose options are functional in
the system should be displayed. To select the system options, do the
following:
SCREEN
SECTION 4: Initial Setup
ACTION
1. On the "Central Station" screen press
the Options button. A pop-up window is
displayed with an option for selecting
Lighting.
2. Touch the Lighting button to turn the
Lighting option on or off. A checkmark
appears in the button when the Lighting
option is "ON".
Note: DO NOT select the Demo Mode
option. This option should only be
selected if instructed to do so by factory
service. When this option is selected, the
keypad will not communicate with the
control panel and any user can select
Advanced Setup screens.
Press the Apply button to accept the
setting. The TouchCenter returns to the
"Central Station" menu screen.
4–7