Honeywell ADEMCO 6271 Series Installation And Setup Manual page 18

TouchCenter Installation and Setup Guide
To change the address, perform the following.
SCREEN
4–6
ACTION
1. On the "Central Station" screen press
the ECP Address button. A pop-up
window is displayed with options for
selecting the TouchCenter's ECP
address.
2. The available ECP addresses are:
1-2, 5-6 for residential controls or
1-30 for commercial controls
Select the ECP address for this
TouchCenter using the Up/Dn arrows.
Press the APPLY button to accept the
address setting or the BACK or HOME
buttons to maintain the original ECP
address. If APPLY is selected, the
TouchCenter will reset. If BACK is
selected, The "Central Station" menu
screen is displayed.