Installation Instructions; Basic Guidelines - Honeywell IAQPoint2 User Manual

Air quality monitor

Hide thumbs Also See for IAQPoint2:

Technical manual (72 pages)

Quick start manual (2 pages)

Technical manual (80 pages)

Table of Contents

Available languages

Follow these instructions to the letter to ensure that the equipment will

function properly. Failure to respect these guidelines will release

Honeywell Analytics from any responsibility in the event of improper

functioning:

Make sure to locate all transmitters in areas easily accessible for

Avoid locations where instruments are subject to vibrations

Avoid locating transmitters near sources of electromagnetic

interference

Avoid locating transmitters in areas subject to significant

temperature swings

Transmitters should be installed 1.5 m (5 ft.) above the floor for CO

transmitters to prevent signal interference by vehicles ( NO

transmitters should be installed 30 cm [1 ft] from the ceiling.)

Install transmitters in upright position (to ensure ease of use and

access to programming pushbuttons).

Place transmitters so that they are facing the center of the area

Do not install a transmitter facing a parking space; the vehicle will

sever the communication link. If possible, install the transmitter

perpendicular to the space.

Avoid installing the transmitters on or near metal (transformers,

pipes, etc.)

Do not install transmitters on ceilings

Do not install transmitters in ceiling or wall wells (placement in

these areas may impede signal transmission)