Honeywell IAQPoint2 User Manual page 985

System Programming
Config Menu
The fourth screen in the Config menu allows a definition of a day and a
week to be programmed.
Day and Week definition allows hours (time frames) to be defined for
either Daytime and Working Days respectively.
Note: Remember, the controller uses a 24 hour clock (0:00 to 23:59).
Any time changes (DST) must be made manually or through
BACNet time synchronisation (BACNet module required).
58
6. Config
Day definition
Week definition
Day definition
-Daytime-
sta: 08:00
end: 17:00
Week definition
-Working Days-
sta: Monday
end: Friday
96d User Manual
Honeywell
M-511401
8/10