Viewing Resource Usage - Cisco Catalyst 6500 Series Configuration Manual

Monitoring Security Contexts
mac-addresses
Table 5-4
Table 5-4
Field
Resource
Class
Mmbrs
Origin
Limit
Total
% of Avail

Viewing Resource Usage

From the system execution space, you can view the resource usage.
From the system execution space, view the resource usage for each context by entering the following
command:
FWSM# show resource usage [context context_name | top n | all | summary | system]
[resource {[rate] resource_name | all} | detail] [counter counter_name [ count_threshold ]]
all is the default, and shows resource usage for each context individually.
Enter the top n keyword to show the contexts that are the top n users of the specified resource. You must
specify a single resource type, and not resource all, with this option.
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
5-28
default
gold
silver
bronze
All Contexts:
shows each field description.
show resource allocation detail Fields
Description
The name of the resource that you can limit.
See the "Configuring a Class" section on page 5-14
each resource name.
The name of each class, including the default class.
The All contexts field shows the total values across all classes.
The number of contexts assigned to each class.
The origin of the resource limit, as follows:
A—You set this limit with the all option, instead of as an individual resource.
•
C—This limit is derived from the member class.
•
• D—This limit was not defined in the member class, but was derived from the
default class. For a context assigned to the default class, the value will be "C"
instead of "D."
The FWSM can combine "A" with "C" or "D."
The limit of the resource per context, as an absolute number. If you specified a
percentage in the class definition, the FWSM converts the percentage to an absolute
number for this display.
The total amount of the resource that is allocated across all contexts in the class.
The amount is an absolute number of concurrent instances or instances per second.
If the resource is unlimited, this display is blank.
The percentage of the total system resources that is allocated across all contexts in
the class. If the resource is unlimited, this display is blank.
all C 65535
1 D 65535
1 CA 6553
0 CA 3276
3
Chapter 5 Managing Security Contexts
65535 100.00%
6553 9.99%
137623 209.99%
for more information about
OL-6392-01