Configuring Ip Addresses - Cisco Catalyst 6500 Series Configuration Manual

Configuring IP Addresses, Routing, and DHCP
This chapter tells how to configure IP addresses, static routes, dynamic routing, and DHCP on the
Firewall Services Module (FWSM).
For routed and transparent mode, see the following sections:
•
•
•
•
For routed mode only, see the following sections:
•
•
•
Multiple security contexts do not support dynamic routing protocols, such as RIP and OSPF.
Note

Configuring IP Addresses

This section describes how to set the IP address(es) for routed mode or for transparent mode, and
includes the following topics:
•
•
OL-6392-01
Configuring IP Addresses, page 8-1
Configuring the Default Route, page 8-2
Configuring Static Routes, page 8-3
Configuring the DHCP Server, page 8-19
Configuring OSPF, page 8-4
Configuring RIP, page 8-18
Configuring DHCP Relay, page 8-21
Assigning IP Addresses to Interfaces for a Routed Firewall, page 8-2
Setting the Management IP Address for a Transparent Firewall, page 8-2
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
C H A P T E R
8
8-1