Chapter 12
Configuring AAA
Figure 12-1 Permitting Specific Commands
Figure 12-2 Permitting the Show Version of a Command
You can permit all arguments of a command that you do not explicitly deny by selecting the Permit
•
Unmatched Args check box.
For example, you can configure just the show command, and then all show commands are allowed.
We recommend using this method so that you do not have to anticipate every variant of a command,
including abbreviations and ?, which shows CLI usage. (See
Figure 12-3 Permitting All Related Commands
OL-6392-01
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
Configuring Command Authorization
Figure
12-3.)
12-15