Restarting The Ospf Process - Cisco Catalyst 6500 Series Configuration Manual

Chapter 8 Configuring IP Addresses, Routing, and DHCP
To display various routing statistics, perform one of these tasks, as needed:
•
•
•
•
•
•
•
•
•
•

Restarting the OSPF Process

To restart an OSPF process, clear redistribution, or counters, enter the following command:
FWSM(config)# clear ip ospf pid {process | redistribution | counters
[neighbor [ neighbor-interface ] [ neighbor-id ]]}
OL-6392-01
To display general information about OSPF routing processes, enter the following command:
FWSM# show ip ospf [ process-id ]
To display the internal OSPF routing table entries to the area border router and autonomous system
border router, enter the following command:
FWSM# show ip ospf border-routers
To display lists of information related to the OSPF database for a specific router, enter the following
command:
FWSM# show ip ospf [ process-id [ area-id ]] database
To display a list of LSAs waiting to be flooded over an interface (to observe OSPF packet pacing),
enter the following command:
FWSM# show ip ospf flood-list interface interface-type
To display OSPF-related interface information, enter the following command:
FWSM# show ip ospf interface [ interface-type interface-number ]
To display OSPF neighbor information on a per-interface basis, enter the following command:
FWSM# show ip ospf neighbor [ interface-name ] [ neighbor-id ] detail
To display a list of all LSAs requested by a router, enter the following command:
FWSM# show ip ospf request-list [neighbor] [interface] [interface-neighbor]
To display a list of all LSAs waiting to be resent, enter the following command:
FWSM# show ip ospf retransmission-list [neighbor] [interface] [interface-neighbor]
To display a list of all summary address redistribution information configured under an OSPF
process, enter the following command:
FWSM# show ip ospf [ process-id ] summary-address
To display OSPF-related virtual links information, enter the following command:
FWSM# show ip ospf virtual-links
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
Configuring OSPF
8-17