W
iring diagram
[1] Motor housing
All models
Route Field lead wires as illustrated below. (Fig. D-3)
Fig. D-3
Motor housing
Pickup coil to which Sleeve is assembled
Before assembling Pickup coil to Motor housing,
route Lead wires of Pickup coil as described below:
1) Route beside the rib of Sleeve.
2) Then fix with the lead wire holder of Sleeve.
3) Make sure that Lead wires are tight.
to Controller
rib
Pickup coil
Field lead wires
(orange, white)
[A]
Motor housing,
viewed from [A]
lead wire holder
Sleeve
Route Field lead wires through this opening.
opening
P 8/10