Download Print this page

Makita GA5020C User Instructions page 6

125mm (5") /150mm (6")
Hide thumbs Also See for GA5020C:

Advertisement

R
epair
[3] -3. Shaft lock section
DISASSEMBLING
1) Remove Bearing box from Gear housing. (Fig. 9 on page 4)
2) Shoulder pin 5 can be removed from Gear housing using 1R268, 1R350 and plastic hammer as illustrated in Fig. 18.
Fig. 18
Gear housing
ASSEMBLING
Do the reverse of the disassembling steps.
Note: Do not reinstall removed Pin cap because removal of Shoulder pin 5 damages the inside surface of Pin cap.
Be sure to remove plastic dust of Pin cap from Shoulder pin 5 and to install it onto new Pin cap.
1R268
Pin cap
1R350
Gear housing
P 6/10
1R268
Pin cap
Compression spring 8
Shoulder pin 5
O ring 7
1R350

Advertisement

loading

This manual is also suitable for:

Ga6020cGa5021cGa6021c