Add Bluetooth Accessory; Delete Bluetooth Accessory - Cisco 9971 Standard User Manual

3. Select Analog Headset and press the Setup softkey.
The phone screen displays the wideband status for the analog headset.
4. Press the Turn On softkey to enable wideband for the analog headset.
5. Press the Turn Off softkey to disable wideband for the analog headset.
6. Press the return softkey

Add Bluetooth Accessory

(For Cisco Unified IP Phone 9951 and 9971 only.)
Before You Begin
Before you add a Bluetooth accessory, it must be discoverable by the phone. Look for a flashing LED
on a Bluetooth accessory as an indication that it is discoverable. For more information, see the
documentation from the Bluetooth accessory manufacturer.
1. Press the Applications button
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
3. Select Add Bluetooth Accessory.
The phone searches for discoverable accessories that are supported. When an accessory is found,
it is added to the list in the Adding Bluetooth Accessory screen.
4. Select the accessory and press the Connect softkey.
5. The phone automatically attempts to connect the accessory using a Bluetooth device PIN of
"0000." If your accessory requires a different PIN and the Adding PIN screen appears, enter the
PIN for your accessory.
When the connection is completed, the Bluetooth active icon
header and a checkmark appears next to the connected accessory.

Delete Bluetooth Accessory

(For Cisco Unified IP Phone 9951 and 9971 only.)
1. Press the Applications button
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
3. Select a Bluetooth accessory and press the Delete softkey.
The Bluetooth accessory will be disconnected (if it was connected) and removed from the
Accessories list.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 8.0 (SIP)
to return to the Accessories screen.
.
.
Applications
appears on the phone screen
55