Brother DCP-1510 Service Manual page 57

Error code A300
Document Jam
Clear the scanner jam, then press the Stop Key.
The document scanning position sensor has not detected the document passing even after
the document has been fed for the specified distance.
<User Check>
• Remove the jammed document.
Step
Document scanning position
1
actuator coming off
Document scanning position
2
sensor failure
3 Main PCB failure
Error code A500
Scan Unable A5
Remove the original document. Turn the power off, then on again
When scanning the fax, white or black correction data for the CIS was not within the correct
range.
Error code A600
Scan Unable A6
Turn the power off and then back on again.
Although operation was retried due to error A500 that occurred while scanning the fax, white
or black correction data for the CIS was not within the correct range.
Error code A700
Print Unable A7
Turn the power off and then back on again.
Color parameter in the ROM does not match the CIS.
Step
Incorrect correction data for CIS
1
unit
Connection failure of the CIS
2
flat cable
3 CIS unit failure
4 Main PCB failure
Cause
Reattach the document scanning position
actuator.
Replace the document scanning position
sensor PCB ASSY.
Replace the main PCB ASSY.
Cause
Execute function code 55.
Reconnect the CIS flat cable.
Replace the CIS unit.
Replace the main PCB ASSY.
1-40
Remedy
Remedy
Confidential