Set Country / Language (Function Code: 52); Set Country / Language - Brother DCP-1510 Service Manual

1.3.13 Set country / language (function code: 52)

<Function>
This function is user accessible, and is used to customize the EEPROM's language, function
settings, and firmware switch settings.
Note:
• This function can be used only in the following nations: France and neighboring
countries, Pan-Nordic, East Europe, Oceania, Iberia.
<Operating Procedure>
(1) Ten-key pad models
Press the [5] and [2] buttons in this order in the initial state of maintenance mode.
Non-ten-key pad models
Press the [
[OK] button.
(2) "Set Country" is displayed on the LCD, and names of country in their respective
language follow.
(3) Press the [Start] button if the displayed country is correct. The EEPROM is now
customized, and the machine returns to the ready state.
German
Austria
Deutschland
österreich
] or [ ] button to display "MAINTENANCE 52" on the LCD and press the
Oceania
Australia
New Zealand
Pan-Nordic
Norge österreich
Suerige Cheska republika
Suomi Magyaroraz g
Danmark Polska
Others
Rom nia
Slovensko
Others
4-22
East Europe
Confidential