Side Cover L - Brother DCP-1510 Service Manual

7.11 Side cover L

(1) Open the pull-arm about 135 degrees and pull it up to remove it from the side cover L.
(2) Remove the three taptite bind B M4x12 screws. Release the three hook bushings of the
side cover L. Pull out the three tabs and release the four hooks on the bottom. Disconnect
the hook PCB harness from the hook harness (only for models with handset), and remove
the side cover L from the machine.
(3) Remove the taptite bind B M4x12 screw, and release the hook of the dress cover L to
remove it from the side cover L.
Pull-arm
Hook PCB harness
(only for models with handset)
Taptite bind B M4x12
Hook
bushings
Tabs
Hook harness
(only for models
with handset)
135°
Hooks
Fig. 2-30
Taptite bind B
M4x12
Dress cover L
Hook
Side cover L
2-33
Taptite bind B M4x12
Hook bushing
Tab
Confidential