1.3.17 Print test (function code: 67)
<Function>
This function is used to conduct paper feed and eject tests while printing patterns.
<Operating Procedure>
(1) Ten-key pad models
Press the [6] and [7] buttons in this order in the initial state of maintenance mode.
Non-ten-key pad models
Press the [
[OK] button.
(2) "PAPER FEED TEST" is displayed on the LCD and the lattice pattern is printed
continuously.
(3) Press the [Stop/Exit] button to stop printing. Printing of the test pattern is stopped, and
the machine returns to the initial state of maintenance mode.
Print pattern
] or [
] button to display "MAINTENANCE 67" on the LCD and press the
Fig. 4-9
4-26
Confidential