Download Parameters To Drive; Parameter Sets; Parameter Backup; Storing And Loading Of Parameter Sets - Honeywell NX series User Manual

7
74(86)
Download parameters to drive (From keypad, S6.5.2)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided
that the drive is in STOP status.
Enter the From keypad page (S6.5.2) from the Parameter copy menu. Push the
button to enter the edit mode. Use the
or Application parameters and press the
The procedure to download the parameters from keypad to drive is similar to that of from drive to
keypad. See above.
Parameter sets (S6.5.3)
The NX frequency converter features a possibility for the user to store and load two customised
parameter sets (all parameters included in the application) and to load back the factory default
parameter values.
On Parameter sets page (S6.7), push the
Select begins to blink allowing you to choose any of the storing or loading functions with the
Browser buttons. You can store or load two customised parameter sets or load back the factory
defaults. Confirm with the

Parameter sets

Select
Parameter sets
Wait...
Figure 7-20. Storing and loading of parameter sets
Parameter backup (P6.5.4)
On this page the user can activate or inactivate the parameter backup function. Enter the edit
mode by pressing the
When the Parameter backup function is activated the NX control keypad makes a copy of the
parameters of the presently used application. When applications are changed, the user will be
asked if they wish the parameters of the new application to be uploaded to the keypad. For this to
happen, push the
application saved in the keypad push any other button. The user will be able to download these
parameters to the drive following the instructions given in chapter 7.3.6.5.
Control keypad
Browser buttons
Enter button. Wait until 'OK' appears on the display.
READY
I/Oterm
READY
I/Oter m
right arrow menu button. Choose Yes or No with the
Enter button. If a copy is required of the parameters of the previously used
to select either the option All parameters
Enter button. Wait until 'OK' appears on the display.
right arrow menu button
READY
I/Oterm
Parameter sets
Store Set1
READY
I/Oterm
Parameter sets
OK
right arrow menu
to enter the Edit menu. The text
enter
CONFIRM
CANCEL
Browser buttons.