System Menu (M6) - Honeywell NX series User Manual

7
64(86) Control keypad

System menu (M6)

7.3.6
The System menu can be entered from the main menu by pushing the right arrow menu button
Menu button right when the location indication M6 is visible on the display.
The controls associated with the general use of the frequency converter, such as application
selection, customised parameter sets or information about the hardware and software are located
under the System menu. The number of submenus and sub pages is shown with the symbol S (or
P) on the value line.
On page 65 is a list of the functions available in the System menu.