Application Selection; Language Selection; Change Of Application; System Menu - Honeywell NX series User Manual

7.3.6.1

Application selection

The user can select the application desired by entering the Application selection page (S6.1). This
is done by pushing the
Change the application by pushing the
application starts to blink. Browse through the applications with the
another application with the
In this phase, the display requests whether theparameters of the new application are to be
uploaded to the keypad. If so press the
parameters of the previously used application saved in the keypad. For more information, see
Chapter 7.3.6.5.
For more information about the Application Package, see the NX Application Manual.
I/Oterm

System Menu

I/Oterm
Application
Standard
Figure 7-9. Change of application
7.3.6.2

Language selection

The HMI control keypad offers the user the possibility to control the frequency converter through
the keypad in the language of your choice.
Locate the language selection page under the System menu. Its location indication is S6.2. Press
the right arrow menu button
blink choose another language for the keypad texts. Confirm the selection by pushing the
button The blinking stops and all textual information on the keypad is presented in the language
chosen.
Return to the previous menu anytime by pushing the
Control keypad
right arrow menu button
right arrow menu button
Enter button.
STOP READY
"
S1 S11
STOP READY
once to enter the edit mode. As the name of the language starts to
when on the first page of the System menu.
Enter button Pushing any other button leaves the
STOP
I/Oterm
Application
Standard
STOP
I/Oterm
Application
enter
Multi-step
left arrow menu
once again. The name of the
Browser buttons
READY
READY
button.
7
67(86)
and select
Enter