Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Float section
DISASSEMBLING
(1) Release Hook for separating the Motor section from Tank section. See Fig. 2.
(2) Disassemble Float cage as drawn in Fig. 11.
Fig. 11
1. Disassemble Float cage from
the bottom of Tank cover by
loosening three 4x25 Tapping
screws.
ASSEMBLING
Assemble Float to Float cage as drawn in Fig. 12, and reverse the step shown in Fig. 11.
Fig. 12
Tank cover
complete
Float cage
4x25 Tapping screw (3pcs.)
Tabs
Float
Float cage
viewed from
the top
2. Float can be removed from Float cage.
Float
Float cage
Sponge seal
1. Face the sponge seal side of Float to Tank cover.
(Also see Fig. 11)
2. Insert the tabs of Float to
the groove of Float cage.
Grooves
P 9/ 23
Sponge seal
Advertisement
