Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4 Caster 50 for VC1310L and VC2510L: Four wheel type)
DISASSEMBLING
Casters for VC1310L are different from those for VC2510L in the length of Socket stem.
However, they can be removed and assembled in the same way.
(1) Separate Motor section from Tank section as drawn in Fig. 2.
(2) Remove Casters as drawn in Fig. 15.
Fig. 15
1. Inserting Slotted screwdriver between Tank and Socket stem
of Caster 50, lever up Caster 50 until the space to insert 1R263
is reserved.
Socket stem
of Caster 50
Tank has two grooves 50 to
insert 1R263 near the rear
Casters 50.
1. Applying Slotted screwdriver between Tank and Socket stem
of Caster 50, tap the Slotted screwdriver to reserve the space
to insert 1R263.
Socket stem
of Caster 50
Slotted
screwdriver
(Rear) Caster 50 with Wheel lock
Groove
on Tank
VC1310L
(Front) Caster 50 without Wheel lock
Tank
2. Inserting 1R263 into the space,
lever up Caster 50 and pull it off.
Slotted
screwdriver
Tank
VC2510L
2. Inserting 1R263 into the space,
lever up Caster 50 and pull it off.
1R263
P 11/ 23
1R263
Tank
Advertisement
