Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Motor section (cont.)
ASSEMBLING
(5) Assemble Motor section to Tank cover complete as drawn in Fig. 10.
Fig. 10
Round depressions on the back side of Support ring
1. Fit the round depressions of Support ring
to the round protrusions of Tank cover.
2. Mount Motor section to Tank cover by
fitting the square protrusions on Fan cover
to the square depressions of Support ring.
(6) Mounting Separator complete, connect the receptacles of Field lead wires to Controller. Refer to Fig. 4.
(7) Assemble Cowling complete as drawn in Fig. 11.
Fig. 11
Separator
complete
Tank cover
complete
Protrusion
Fan cover
Cowling complete
long rib of
Switch base
Protrusion
Fitting the long rib of Switch base to the groove of
Cowling complete, assemble Cowling complete.
P 8/ 23
Tank cover
Concaves on
the head side of
Support ring
Groove
Advertisement
