Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-5. Bumper for VC1310L, VC2510L
ASSEMBLING
Bumper can be assembled as drawn in Fig. 22.
Fig. 22
1. Set Bumper to the rear side of Tank
while aligning the Triangle mark to
the line of Center rib.
[3]-6A. Bumper for VC3210L
DISASSEMBLING
Remove Bumper as drawn in Fig. 23.
Fig. 23
Insert Slotted screwdriver
between Bumper and Tank,
then slide the Bumper.
ASSEMBLING
Mount Bumper as drawn in Fig. 24.
Fig. 24
Aligning the triangle mark to the center
of Tank, assemble Bumper so closely that
there is no gap between Tank and Bumper.
Outlet installation side
Caster 50 with
Wheel lock
Bumper
Tank
2. Fitting the Bumper from the rear side to
Outlet installation side, assemble it to Tank.
3. Assemble Bumper so closely to Tank that
there is no gap between Bumper and Tank.
Caster 50 with
Wheel lock
Center rib
Caster 170
P 14/ 23
Outlet installation
side
Advertisement
