Makita VC1310L Technical Information page 10

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Grip
DISASSEMBLING
Remove Grip as drawn in Fig. 13.
Fig. 13
1. Fold Grip on Cowling complete.
3. By pushing Grip toward outside,
remove the boss of grip from
Cowling complete.
Cowling complete
ASSEMBLING
(1) Assemble Grip to Cowling complete as drawn in Fig. 14..
Fig. 14
1. Insert one boss of Grip to
the hole of Cowling complete.
Cowling complete
2. Insert slotted screwdriver into
the center side gap between
Grip and Cowling complete.
4. Lifting up the grip, push it toward
the opposite side to remove the boss
of the other side.
Grip
2. Hook the opposide end of Grip with
slotted scrwedriver to fit the other
boss to the hole of Cowling complete.
Grip
Boss
5. Grip is removed from
Cowling complete.
3. Grip is assembled to
Cowling complete.
P 10/ 23