Makita VC1310L Technical Information page 22

W
iring diagram
Mount Carbon brush and put the Pig tail ( lead wire of Carbon brush) as drawn in Fig. D-6.
Fig. D-6
1. Insert Carbon brush into Brush holder
while facing its Wire connecting portion
to the opposite side of Spiral spring.
Spiral spring
Carbon brush
3. Put Pigtail (Lead wire of Carbon brush) between the Receptacle's line
and Carbon brush as drawn below. Otherwise, Pig tail is pinched
between Brush holder and Motor cover as drawn right.
Wiring of Pigtail (Lead wire of Carbon brush)
Wire Connecting portion
of Carbon brush
Receptacle's Line
Pigtail (Lead wire of
Carbon brush)
Carbon brush
2. Connect the Receptacle of Carbon brush
to Brush holder while facing its Wire
connecting portion to Fan 62 side.
Fan 62 Side
o
Motor cover
Pinched
Pigtail
Brush
holder
P 22/ 23
Wire connecting
portion of
Receptacle