Makita VC1310L Technical Information page 16

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-6A. Inlet for VC3210L
ASSEMBLING
Set Inlet in place as drawn in Fig. 25A.
Fig. 25A
1. Inserting Holder into Holder plate, pass the Holder through Tank.
Holder plate
3. Mount O ring 56 to the Holder.
fasten Holder plate and one end of Holder to Inlet with 4x28
Tapping screws through Tank.
O ring 56
Holder
Inlet cover
Holder
VC3210L
4. Mount Rubber holder to the other end
of Holder. And fasten the Inlet cover with
four 4x14 Tapping screws
4x14 Tapping screw
(4pcs.)
Inlet
Rubber
holder
2. Assemble Inlet to Inlet cover.
Inlet cover
Inlet
Inlet cover
P 16/ 23