NETGEAR 7200 Series User Manual page 37

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Table 6-4. Quick Startup IP Address
Command
config network parms
Quick Startup
Details
Default Gateway - The default Gateway for this interface
Default value is 0.0.0.0
Burned in MAC Address - The Burned in MAC Address used for
in-band connectivity
Locally Administered MAC Address - Can be configured to allow
a locally administered MAC address
MAC Address Type - Specifies which MAC address should be
used for in-band connectivity
Network Configurations Protocol Current - Indicates which
network protocol is being used
Default is DHCP
Java Mode - Specifies whether the switch should allow the Java
applet to show the interactive switch graphic (see
Switch Image" on page
Default is enable
config network parms <ipAddr> <Mask> <gateway>
IP Address range from 0.0.0.0 to 255.255.255.255
Subnet Mask range from 0.0.0.0 to 255.255.255.255
Gateway Address range from 0.0.0.0 to 255.255.255.255
202-10010-01
5-3)
"Interactive
6-5