User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
transfer download serverip
This command configures the IP address of the server on which the file is located.
Note: This command is valid only when the transfer mode is TFTP. See "transfer download
mode" .
Default
Format
transfer download path
This command sets the directory path used to download the file. The switch "remembers" the last
file path used.
Note: This command is valid only when the Transfer Mode is TFTP. See "transfer download
mode" on page 76. Details of the TFTP path are explained under the command
path <path>.
Default
Format
transfer download filename
This command sets the name for the file that is downloaded to the switch. The switch
"remembers" the last file name used.
Append the file path to the file name if the string is less than 31 characters. Otherwise, use the
transfer download path command, and the File Name will be appended to the File Path as is.
Note: This command is valid only when the Transfer Mode is TFTP. See "transfer download
mode" on page 76.
Default
Format
transfer download datatype
This command sets the type of file to download to the switch.
Default
Format
Switching Commands
0.0.0.0
transfer download serverip <ipAddr>
Blank
transfer download path <path>
Blank
transfer download filename <name>
code
transfer download datatype <code|config>
202-10010-01
transfer upload
7-77