Config Authentication Login Delete; Config Authentication Login Set - NETGEAR 7200 Series User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Default
Format

config authentication login delete

This command deletes the specified authentication login list. The attempt to delete will fail if any
of the following conditions are true:
• The login list name is invalid or does not match an existing authentication login list
• The specified authentication login list is assigned to any user or to the nonconfigured user for
any component
• The login list is the default login list included with the default configuration and was not
created using 'config authentication login create'. The default login list cannot be deleted.
Format

config authentication login set

This command sets an ordered list of methods in the authentication login list. The maximum
number of authentication login methods is three. The possible method values are
and .
reject
The value of indicates that the user's locally stored ID and password are used for
local
authentication. The value of
using the RADIUS server. The value of
To authenticate a user, the authentication methods in the user's login will be attempted in order
until an authentication attempt succeeds or fails
Note that the default login list included with the default configuration can not be changed.
Default
Format
Switching Commands
None
config authentication login create <listname>
config authentication login delete <listname>
indicates that the user's ID and password will be authenticated
radius
indicates that the user is never authenticated.
reject
.
None
config authentication login set <listname> <local/
radius/reject> [local/radius/reject] [local/radius/
reject]
202-10010-01
local, radius,
7-71