User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
System Info and System Setup
There are several categories of Quick Startup commands:
•
"Quick Startup Software Version Information" on page 6-2
•
"Quick Startup Physical Port Data" on page 6-3
•
"Quick Startup User Account Management" on page 6-3
•
"Quick Startup IP Address" on page 6-4
•
"Quick Startup Uploading from Switch to Out-of-Band PC (Only XMODEM)" on page 6-6
•
"Quick Startup Downloading from Out-of-Band PC to Switch (Only XMODEM)" on page 6-6
•
"Quick Startup Downloading from TFTP Server" on page 6-7
•
"Quick Startup Factory Defaults" on page 6-7
Quick Startup Software Version Information
Table 6-1.
Quick Startup Software Version Information
Command
show inventory
6-2
Details
Allows the user to see the software version the device contains
Machine Model (The type and number of ports the device provides.)
For example:
System Description ................................ netgear
Burned In MAC Address ........................ 00:06:29:32:81:40
Software Version ..................................... 1.0.0.9
202-10010-01
Quick Startup