Makita GA5020 Instruction Manual page 10

wheel brush. A cut-off wheel can also be used with an
optional guard. If you decide to use your Makita grinder
with approved accessories which you purchase from
your Makita distributor or service center, be sure to
obtain and use all necessary fasteners and guards as
recommended in this manual. Your failure to do so
could result in personal injury to you and others.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Wheel guard (Wheel cover) For depressed center
wheel/Multi disc
• Wheel guard (Wheel cover) For abrasive cut-off wheel/
diamond wheel
• Depressed center wheels
• Abrasive cut-off wheels
• Multi discs
• Diamond wheels
• Wire cup brushes
• Wire bevel brush 85
• Abrasive discs
• Inner flange
• Lock nut For depressed center wheel/abrasive cut-off
wheel/multi disc/diamond wheel
• Lock nut For abrasive disc
• Lock nut wrench
• Side grip
• Rubber pad
• Dust cover attachment
Noise
The typical A-weighted noise level determined according
to EN60745:
Model GA5020, GA6020 and GA6021
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model GA5020, GA5021, GA5021C and GA6021C
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model GA6020C
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model GA6021
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Model GA5021C and GA6021C
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
10
ENG905-1
): 89 dB (A)
pA
): 100 dB (A)
WA
): 90 dB (A)
pA
): 101 dB (A)
WA
): 91 dB (A)
pA
): 102 dB (A)
WA
ENG900-1
2
): 6.5 m/s
h,AG
2
2
): 8.5 m/s
h,AG
2
Model GA5020 and GA6020C
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Model GA5020C
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Model GA6020
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Model GA5021
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration
emission value may be different.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: GA5020/C, GA5021/C, GA6020/C,
GA6021/C
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
2
): 9.0 m/s
h,AG
2
2
): 9.5 m/s
h,AG
2
2
): 10.0 m/s
h,AG
2
2
): 13.5 m/s
h,AG
2
ENG902-1
ENH101-14