Ii-1-1-3 Wan3/Wan4 (Usb) - Draytek Vigor2860 series User Manual

After finished the above settings, click OK to save the settings.
I I - 1 - 1 - 3 W
I I - 1 - 1 - 3 W
To use 3G/4G network connection through 3G/4G USB Modem, please configure WAN3 or
WAN4 interface.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Line Speed
Active Mode
76
Any of the selected WAN disconnect – Such backup WAN
will be activated when any master WAN interface
disconnects.
All of the selected WAN disconnect – Such backup WAN will
be activated only when all master WAN interfaces
disconnect.
A N 3 / W A N 4 ( U S B )
A N 3 / W A N 4 ( U S B )
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
If your choose According to Line Speed as the Load Balance
Mode, please type the line speed for downloading and
uploading for such WAN interface. The unit is kbps.
Choose Always On to make the WAN1 connection being
activated always.
Load Balance: Check this box to enable auto load balance
function for such WAN interface.
Vigor2860 Series User's Guide