Draytek Vigor2860 series User Manual page 683

-d <server>
-D <server>
-t <dhcp/ra/none>
-V
-o
E x a m p l
E x a m p
> ip6 internet -W 2 -M 2 -u 88886666 -p draytek123456 –s
amsterdam.freenet6.net
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> system reboot
T e l n e t C o m m
T e l n e t C o m m
This command allows you to display IPv6 neighbour table.
S y n t a x
S y n t a x
ip6 neigh -s[ inet6_addr] [eth_addr] [LAN|WAN1|WAN2]
ip6 neigh -d [inet6_addr] [LAN|WAN1|WAN2]
ip6 neigh -a [inet6_addr] [-N LAN|WAN1|WAN2]
S y n t a x
S y n t a x
Parameter
-s
-d
-a
inet6_addr
eth_addr
LAN|WAN1|WAN2
E E x x a a m m p p l
> ip6 neigh -s 2001:2222:3333::1111 00:50:7F:11:ac:22:WAN2
> ip6 neigh -a
I/F ADDR
-------------------------------------------------------------------------
LAN FF02::1
WAN2 2001:5C0:1400:B::10B8
WAN2 2001:2222:3333::1111
WAN2 2001:2222:6666::1111
Vigor2860 Series User's Guide
<server>= IPv4 address or URL (maximum 63 characters).
It means to set the primary DNS Server IP.
<server>= type an IPv6 address for first DNS server.
It means to set the secondary DNS Server IP.
<server>= type an IPv6 address for second DNS server.
It means to set IPv6 PPP WAN test mode for DHCP or RADVD.
<dhcp/ra/none>= type IPv6 address.
It means to view IPv6 Internet Access Profile.
It means to set AICCU always on.
1=On,
0=Off
e
l e
a n d : i p 6 n e i g h
a n d : i p 6 n e i g h
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to add a neighbour.
It means to delete a neighbour.
It means to show neighbour status.
Type an IPv6 address
Type submask address.
Specify an interface for the neighbor.
l e e
Neighbour 2001:2222:3333::1111 successfully added!
MAC
33-33-00-00-00-01
00-00-00-00-00-00
00-00-00-00-00-00
00-00-00-00-00-00
STATE
CONNECTED
CONNECTED
CONNECTED
CONNECTED
669