Ii-5-2-2 Diagnose - Draytek Vigor2860 series User Manual

More options
3. When you finish the configuration, please click OK to save and exit this page.
I I - 5 - 2 - 2 D
I I - 5 - 2 - 2 D
With the analysis done by such page, possible path (static route, routing table or policy
route) of the packets sent out of the router can be traced.
or
Vigor2860 Series User's Guide
Packet Forwarding to WAN via – When you choose WAN
(e.g., WAN1) as the Interface for packet transmission, you
have to specify the way the packet forwarded to. Choose
Force NAT or Force Routing.
Failover to – Check this button to lead the data passing
through specific interface (WAN/LAN/VPN/Route Policy)
automatically when the selected interface (defined in Send
via if criteria matched) is down.



Gateway IP – Specific gateway is used only when you want
to forward the packets to the desired gateway. Usually,
Default Gateway is selected in default.
i a g n o s e
i a g n o s e
WAN/LAN – Use the drop down list to choose an
interface as an auto failover interface.
VPN – Use the drop down list to choose a VPN tunnel as
a failover tunnel.
Route Policy – Use the drop down list to choose an
existed route policy profile.
225