Draytek Vigor2860 series User Manual page 235

Vdsl2 security firewall

Hide thumbs Also See for Vigor2860 series:

Table of Contents

To use Wizard Mode, simple do the following steps:

1. Click the Wizard Mode radio button.

2. Click Index 1. The setting page will appear as follows:

Available settings are explained as follows:

Destination IP

3. Click Next to get the following page.

Available settings are explained as follows:

Vigor2860 Series User's Guide

Any – Any IP can be treated as the source IP.

Src IP Start - Type the source IP start for the specified WAN

Src IP End - Type the source IP end for the specified WAN

interface. If this field is blank, it means that all the source

IPs inside the LAN will be passed through the WAN

Any – Any IP can be treated as the destination IP.

Dest IP Start- Type the destination IP start for the specified

WAN interface.

Dest IP End - Type the destination IP end for the specified

WAN interface. If this field is blank, it means that all the

destination IPs will be passed through the WAN interface.

Use the drop down list to choose a WAN or LAN interface or

VPN profile. Packets match with the above criteria will be

transferred to the interface chosen here.