Draytek Vigor2860 series User Manual page 479

Device Management
After finished the above settings, click OK to save the configuration.
F o r I P v 6
F o r I P v 6
Available settings are explained as follows:
Item
Management Access
Control
Access List
After finished the above settings, click OK to save the configuration.
Vigor2860 Series User's Guide
Check the box to enable the device management function for
Vigor2860.
Respond to external device – If it is enabled, Vigor2860 will
be regarded as slave device. When the external device
(master device) sends request packet to Vigor2860,
Vigor2860 would send back information to respond the
request coming from the external device which is able to
manage Vigor2860.
Description
Allow management from the Internet - Enable the checkbox
to allow system administrators to login from the Internet.
There are several servers provided by the system to allow
you managing the router from Internet. Check the box(es) to
specify.
Disable PING from the Internet - Check the checkbox to
disable all PING packets from the Internet. For security issue,
this function is enabled by default.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
IPv6 Address /Prefix Length- Indicate the IP address(es)
allowed to login to the router.
465