Draytek Vigor2860 series User Manual page 544

Refresh Min(s)
Refresh
Ch
SSID
Mode
BSSID
Security
Signal (%)
Beacon Period
Last Detected
All the APs detected by Vigor router will be treated as unknown APs. You have to specify
which AP is friendly and which one is Rogue respectively. Follow the steps below to perform
the classification of access points.
1. Click the radio button on one of the access points. In this case, DrayTek-LAN-A is
selected.
2. Later, some options will appear on the bottom of the page.
530
will be displayed on this page.
Local WLAN Detection – The router will detect all the access
points through wireless LAN connection.
Specify the access points which are classified under each type.
Use the drop down list to specify the time to refresh the web
page.
Click such link to refresh the web page immediately.
Display the channel used by the detected access point.
Display the SSID specified for the detected access point.
Display the mode (AP or Ad Hoc) used by the detected access
point.
Display the MAC address of the detected access point.
Display the encryption mode used by the access point.
Display the signal strength (represented by percentage) sent
by the access point.
Display the period (time) of the beacon. The beacon signal will
be sent out periodically.
Display the date and time that such access point was detected
by Vigor router.
Vigor2860 Series User's Guide