NETGEAR ReadyNAS 102 Hardware Manual page 97

b. While holding the release latch, use your other hand to pull out one end of the
mounting bracket and then the other until the ends extend slightly past the disk tray.
Make sure that the ends of the mounting bracket are even with each other.
c. Slide the bracket down the disk tray, keeping both sides of the bracket even with
each other.
The mounting bracket stops when it hits the bracket lock.
The bracket lock prevents the mounting bracket from sliding all the way off the disk
tray.
6. Attach the new HDD to the mounting bracket.
ReadyNAS OS 6 Desktop Storage Systems
Disks
97
Bracket lock