Add A Disk - NETGEAR ReadyNAS 102 Hardware Manual

Readynas os 6 desktop storage systems
Hide thumbs Also See for ReadyNAS 102:
Table of Contents

Advertisement

Add a Disk

You can add a 3.5-inch hard disk drive, a 2.5-inch hard disk drive, or a 2.5-inch solid state
drive to an empty drive bay.
If you want to add a previously formatted disk to your storage system, see the instructions in
Previously Formatted Disks
To add a 3.5-inch hard disk drive (HDD):
1.
Determine whether you need to shut down your system:
If you are adding disks to a diskless system, gracefully shut down the system.
For information about how to gracefully shut down your system, see the Preferred
Shutdown section of the chapter that describes your system.
If your system is operating with one or more disks, you can add disks while the
system is running. You do not need to shut down the system.
2.
If necessary, slide the recessed handle lock to the unlocked position.
3.
Press the disk tray release latch.
The disk tray handle pops out.
4.
Pull out the disk tray.
5.
Separate the mounting bracket from the disk tray:
a. Press and hold the disk tray release latch.
ReadyNAS OS 6 Desktop Storage Systems
on page 94.
Disks
96

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents