Status Information - NETGEAR ReadyNAS 102 Hardware Manual

Status Information

You can obtain information about the status of your storage system by reviewing the
indicators listed in the following table.
Table 3. ReadyNAS 202 indicator descriptions
Indicator
Power button and LED
Disk LEDs (1, 2)
Disk activity LED
Rear panel Ethernet port
LEDs
ReadyNAS OS 6 Desktop Storage Systems
Description
Press this button to turn on the ReadyNAS. The LED has these states:
• On. Powered on.
• Blinking. Booting or shutting down.
• Off. Powered off.
Each drive bay has an LED associated with it on the front panel of the storage
system. The disk LEDs have these states:
• On. Power is on and the disk is operating normally.
• Blinking. The disk was removed, failed, or is resynchronizing. See the display
screen for details.
• Off. The drive bay is empty.
The disk activity LED has these states:
• Blinking. A disk is active.
• Off. Disk is idling.
Two LED status indicators are built into each port, one off or green and one
showing three states: off, amber, or green. They indicate port speed and activity as
follows:
• Green, green. 1000 Mbps connection speed, no activity.
• Green blinking, green. 1000 Mbps connection speed, activity.
• Green, amber. 100 Mbps connection speed, no activity.
• Green blinking, amber. 100 Mbps connection speed, activity.
• Green on, off. 10 Mbps connection speed, no activity.
• Green blinking, off. 10 Mbps connection speed, activity.
• Off, off. No connection.
NETGEAR ReadyNAS 202
31